|
Graham R
|
The Mile High Wings MHW ProRace 4096 adaptor is now officially released.
Frank Hattich managed to get me onto the development team for this brilliant USB.
You can find it at http://milehighwings.com/
You can use either DSC or receiver with it...just need a 2nd cable.
Its high resolution of 4096 gives maximum smoothness. Important for smooth driving and high accuracy.
It has a 'jitter' reduction system in the software for it (stops servo 'wobble' over the whole throw of the servo).
It remembers your calibration settings.
You can also tell what speed the signal is at.
Its own calibration software sorts out left/right and forward/reverse.
I even did a video to show how easy it is to use the software...
http://milehighwings.com/images/prorace_pwm_calibration.mp4
|
|
Oscar G.
|
COGRATULATIONS GRAHAM FOR YOUR 30.000 KM
|
|
Graham R
|
Posted by: Oscar González (ES) on 15.8.2012 15:28:59 (UTC)
Hi Graham,
How do level up your racing status?
Lots of racing...if you look at the VRC Manual it explains it better....Racer level and status...
http://www.vrcworld.com/manuals/vrcpro/default.aspx#_Toc332119097
Edited by author: 15.8.2012 15:49:11 GMT
|
|
Oscar G.
|
Hi Graham,
How do level up your racing status?
|
|
Graham R
|
Another momentous day for me....now ranked No1 in Overall AND Nitro!!!...just after they release the Offroad as well.
Also released the 'Achievement's' system...no 1 in that too.
At the close of the Olympics...to me it feels like a GOLD medal.
Edited by author: 14.8.2012 9:29:56 GMT
|
|
Zak S
|
Posted by: Graham Raistrick (GB) on 25.2.2012 9:28:50 (UTC)
25th February 2012..I reached PRO status.
Congrats Graham Very good Achievement!
|
|
Graham R
|
25th February 2012..I reached PRO status.
|
|
Graham R
|
Posted by: Eric Brawley (GB) on 1.1.2012 21:37:22 (UTC)
Happy New Year Graham, been feeling a bit I'll and had a very quiet home......you ?
Do you by any chance have the instructions got the FP-T2LGX ?
Eric
Still not found anything, found a guy on etamiya that has rebuilt 2 of them and HE doesn't have instructions.
2PL I can find...looks like the 2lgx was done purely for the Car market...did find my charger for it though...now I can run 24 hours with this one.
Also seems to have some pots on the back...can't remmeber what they are for...might have a fiddle
|
|
Graham R
|
Posted by: Eric Brawley (GB) on 1.1.2012 21:37:22 (UTC)
Happy New Year Graham, been feeling a bit I'll and had a very quiet home......you ?
Do you by any chance have the instructions got the FP-T2LGX ?
Eric
Had a good one but have ended up with a dodgy back now. Fitting washing machine to blame maybe.
Found a manual for the 2PL...
http://manuals.hobbico.com/fut/2l-manual.pdf
Doesn't seem to have the knobs on the top.
On mine top right is dual rate, middle 2 adjust left and right throw. Left one adjusts brake postition...try it in 'Options > Control options and you can see the brake postion jumping...seems to jump in big steps though...I tend to still afjust the brakes in the setup for fine tuning.
The big knob next to the throtle seems to work the same as the VRC Controller...allowing you to set the stop position into the brake area..useful for nitro, but not for elect.
I will delve into the loft to see if I can find the actual 2LGX manual...should be fun.
|
|
Eric B.
|
Happy New Year Graham, been feeling a bit I'll and had a very quiet home......you ?
Do you by any chance have the instructions got the FP-T2LGX ?
Eric
|
