07.07.2025 Category: Site news
As from July 1st onwards we will ship the new 9Turbo RX6S USB adaptor. This new version of the well-known 9Turbo USB adaptor family has increased resolution which is now an incredible 6000 steps to give you the smoothest VRC Pro ride ever!
The RX6S is available in the VRC Pro E-shop at https://www.vrcworld.com/eshop/products.aspx?hw with 1, 3 and 12 months All-Inclusive subscriptions!
Direct support by the manufacturer is available in the dedicated 9Turbo USB adaptor forum topic at https://www.vrcworld.com/forums/posts.aspx?topic=225718&opt=1D1
DRIVER INSTALLATION
When first plugin RX6S to computer USB port, windows will automatic install USB driver to this device,
please wait until USB driver installation show success message.
No custom USB driver is required.
No need to connect to the receiver during the driver installation process.
AUTO DETECT
RX6S have auto detect servo signal in any response rate. It can detect Normal, High, Super, Ultra response of Sanwa and Futaba.
and for other transmitter brands/models, RX6S can detect Normal and High response.
RX6S will do auto detect servo response rate each time that RX6S plug in to USB port. So, after you change servo rate of your transmitter and RE-BIND with receiver already, you must plug in RX6S to USB port again. For letting RX6S detect new servo response rate, do not move the steering wheel while the auto detection is in progress. Wait until the RX6S's blue light stops flashing, which means the auto detection is complete.
PINOUT
caution: if plug to receiver with wrong polarity, SMD fuse in RX6S will burn itself for protect computer's USB port and RX6S's microcontroller.
Plug CH1: White = Signal Axis X Red = +5V Black= Ground
Plug CH2: White = Signal Axis Y Red = not used Black = Ground
Plug CH3: Signal Button 1
Plug CH4: Signal Button 2
POWER
RX6S supply SV to receiver via plug CH1. Receiver doesn't need any battery as it is powered through the USB port!
Comments
Only active members can post comments
(Total posts: 1)
