Welcome to the SantoriniRCnSims

Welcome to our club and feel free to propose ideas for events!

thank you for join

Club details

Club name: SantoriniRCnSims
Created: 16.06.2013
Manager: Panos Stavropoulos
Country: GR Greece
Home track: Clermont Ferrand
Members: 487
joinbutton

Tips & knowledge item

Keep it clean! added: 09.07.2011

Category: Hardware     Views: 7797     Rating:    


No I'm not talking about how you race with others, but about your machine on which you run VRC. It's very important to keep it clean and dust free. This way your machine will not overheat and run slower and you will not damage any internal components.
So use some compressed air to blow off the dust or better, open it up and brush it off.

Comments  

Only active members can post comments
Pages: 1 | 2 (Total posts: 19)
23.08.2012 [16:28]
don't use compressor or compressed air can, blowing dust further into the electronics is no good plan.

Turn of PC and use brush and vacuum to remove 99% of dust from all moving pieces (fans).


then put dust filters on all input sources (fans in the front);
03.03.2012 [19:59]

Yes, right... spring is cleaning, opening windows and goodbye dust... A maintenance event should be placed in the "race calendar" and VRC-pro update and web maintenance placed in the "race calendar"... good idea Mr. Atsushi !
03.03.2012 [17:38]
If PC becomes dirty so much, you should start with cleaning of a house.
02.03.2012 [09:48]

Bump... time has passed...

Maintenance !

Computers must be dusted every 6 month.

Thermal paste (common) replaced every year !

ARCTIC SILVER guaranty of 8 YEARS !!!!!!!!

http://www.arctic.ac/en/p/detail?sArticle=31.%3F



Edited by author: 2.3.2012 9:54:48 GMT
18.08.2011 [23:57]
i haven't opened my pc for over 4 months and it run properly and no dust inside :/ i don't think tha with 8 gb ram 3.6(overclocked) 4 cores 12 blowers it is not going to work properly ;D
12.08.2011 [00:17]

the one I got is not waterproof

09.08.2011 [13:13]
Be sure that there's no power on your machine when cleaning this way xD
09.08.2011 [13:10]
How to clean your computer.

http://www.vrcworld.com/member/photo.aspx?photo=5288&page=1#detail



Edited by author: 11.8.2011 5:12:45 GMT

Edited by administrator: 6.9.2011 10:10:14 GMT
11.07.2011 [10:18]
Stop comparing a computer with a vacuum cleaner !
The place of the dust is in the vacuum cleaner and not in the computer, that is inadmissible !


Edited by author: 11.7.2011 9:19:02 GMT
11.07.2011 [09:38]
It just does, your computer has a lot of air (with dust) going in and out. The dust just seems to stay behind on heatsinks and fans.
11.07.2011 [09:26]
How all this dust can go in the computer ?
11.07.2011 [09:24]
You don't put dust in you computer, you take it OUT! xD
11.07.2011 [09:22]
About the dust, it is the subject of your topic, no ?
11.07.2011 [08:50]
What are you talking about?
10.07.2011 [20:50]
Where can we found all this dust for puting in the computer? in the vacuum cleaner ?

About the author

photo
Marco H
NL Netherlands
Member since 23.06.2011
Show profile
Best class:
Skill rating:
1:8 Nitro sportscar Spec
9.55 (Pro)

Most popular tips

Beginners - Hurry up and slow down... slow right down!

Forum: Training
GB Mike K.
Added: 05.01.2014 [13:38]
Posts: 16     Views: 18516     Rating:

SET-UP Best Lap 10.788s SPEC

Forum: Car setup
IT Kevin P.
Added: 15.07.2014 [21:15]
Posts: 14     Views: 13637     Rating:

Silver dollar 3 Nitro Buggy Set-up

Forum: Car setup
US Colby W
Added: 18.06.2015 [22:16]
Posts: 7     Views: 12671     Rating:

How to figure out which controller to use

Forum: Hardware
GB Graham R.
Added: 08.08.2011 [09:48]
Posts: 16     Views: 12514     Rating:

1/8 Nitro On Road - Lostallo

Forum: Car setup
IT Kevin P.
Added: 07.11.2011 [13:22]
Posts: 13     Views: 11906     Rating:

Files .car

Forum: General
ES Jose B
Added: 27.11.2014 [12:43]
Posts: 6     Views: 9526     Rating:

Short Course Mod Setup

Forum: Car setup
US Colby W
Added: 22.06.2015 [22:23]
Posts: 5     Views: 9439     Rating:

Windows 8

Forum: Hardware
PT Vitor F
Added: 28.01.2013 [15:39]
Posts: 11     Views: 8194     Rating:

Translate

Share on Facebook

Share on Twitter